/*-----------------------------------------------------------. / Curves / '-----------------------------------------------------------*/ /* by Christian Cann Schuldt Jensen ~ CeeJay.dk Curves, uses S-curves to increase contrast, without clipping highlights and shadows. */ float4 CurvesPass( float4 colorInput ) { float3 lumCoeff = float3(0.2126, 0.7152, 0.0722); //Values to calculate luma with float Curves_contrast_blend = Curves_contrast; float PI = acos(-1); //3.1415926589 /*-----------------------------------------------------------. / Separation of Luma and Chroma / '-----------------------------------------------------------*/ // -- Calculate Luma and Chroma if needed -- #if Curves_mode != 2 //calculate luma (grey) float luma = dot(lumCoeff, colorInput.rgb); //calculate chroma float3 chroma = colorInput.rgb - luma; #endif // -- Which value to put through the contrast formula? -- // I name it x because makes it easier to copy-paste to Graphtoy or Wolfram Alpha or another graphing program #if Curves_mode == 2 float3 x = colorInput.rgb; //if the curve should be applied to both Luma and Chroma #elif Curves_mode == 1 float3 x = chroma; //if the curve should be applied to Chroma x = x * 0.5 + 0.5; //adjust range of Chroma from -1 -> 1 to 0 -> 1 #else // Curves_mode == 0 float x = luma; //if the curve should be applied to Luma #endif /*-----------------------------------------------------------. / Contrast formulas / '-----------------------------------------------------------*/ // -- Curve 1 -- #if Curves_formula == 1 x = sin(PI * 0.5 * x); // Sin - 721 amd fps, +vign 536 nv x *= x; //x = 0.5 - 0.5*cos(PI*x); //x = 0.5 * -sin(PI * -x + (PI*0.5)) + 0.5; #endif // -- Curve 2 -- #if Curves_formula == 2 x = x - 0.5; x = ( x / (0.5 + abs(x)) ) + 0.5; //x = ( (x - 0.5) / (0.5 + abs(x-0.5)) ) + 0.5; #endif // -- Curve 3 -- #if Curves_formula == 3 //x = smoothstep(0.0,1.0,x); //smoothstep x = x*x*(3.0-2.0*x); //faster smoothstep alternative - 776 amd fps, +vign 536 nv //x = x - 2.0 * (x - 1.0) * x* (x- 0.5); //2.0 is contrast. Range is 0.0 to 2.0 #endif // -- Curve 4 -- #if Curves_formula == 4 x = (1.0524 * exp(6.0 * x) - 1.05248) / (20.0855 + exp(6.0 * x)); //exp formula #endif // -- Curve 5 -- #if Curves_formula == 5 //x = 0.5 * (x + 3.0 * x * x - 2.0 * x * x * x); //a simplified catmull-rom (0,0,1,1) - btw smoothstep can also be expressed as a simplified catmull-rom using (1,0,1,0) //x = (0.5 * x) + (1.5 -x) * x*x; //estrin form - faster version x = x * (x * (1.5-x) + 0.5); //horner form - fastest version Curves_contrast_blend = Curves_contrast * 2.0; //I multiply by two to give it a strength closer to the other curves. #endif // -- Curve 6 -- #if Curves_formula == 6 x = x*x*x*(x*(x*6.0 - 15.0) + 10.0); //Perlins smootherstep #endif // -- Curve 7 -- #if Curves_formula == 7 //x = ((x-0.5) / ((0.5/(4.0/3.0)) + abs((x-0.5)*1.25))) + 0.5; x = x - 0.5; x = x / ((abs(x)*1.25) + 0.375 ) + 0.5; //x = ( (x-0.5) / ((abs(x-0.5)*1.25) + (0.5/(4.0/3.0))) ) + 0.5; #endif // -- Curve 8 -- #if Curves_formula == 8 x = (x * (x * (x * (x * (x * (x * (1.6 * x - 7.2) + 10.8) - 4.2) - 3.6) + 2.7) - 1.8) + 2.7) * x * x; //Techicolor Cinestyle - almost identical to curve 1 #endif // -- Curve 9 -- #if Curves_formula == 9 x = -0.5 * (x*2.0-1.0) * (abs(x*2.0-1.0)-2.0) + 0.5; //parabola #endif // -- Curve 10 -- #if Curves_formula == 10 //Half-circles #if Curves_mode == 0 float xstep = step(x,0.5); float xstep_shift = (xstep - 0.5); float shifted_x = x + xstep_shift; #else float3 xstep = step(x,0.5); float3 xstep_shift = (xstep - 0.5); float3 shifted_x = x + xstep_shift; #endif x = abs(xstep - sqrt(-shifted_x * shifted_x + shifted_x) ) - xstep_shift; //x = abs(step(x,0.5)-sqrt(-(x+step(x,0.5)-0.5)*(x+step(x,0.5)-0.5)+(x+step(x,0.5)-0.5)))-(step(x,0.5)-0.5); //single line version of the above //x = 0.5 + (sign(x-0.5)) * sqrt(0.25-(x-trunc(x*2))*(x-trunc(x*2))); //worse /* // if/else - even worse if (x-0.5) x = 0.5-sqrt(0.25-x*x); else x = 0.5+sqrt(0.25-(x-1)*(x-1)); */ //x = (abs(step(0.5,x)-clamp( 1-sqrt(1-abs(step(0.5,x)- frac(x*2%1)) * abs(step(0.5,x)- frac(x*2%1))),0 ,1))+ step(0.5,x) )*0.5; //worst so far //TODO: Check if I could use an abs split instead of step. It might be more efficient Curves_contrast_blend = Curves_contrast * 0.5; //I divide by two to give it a strength closer to the other curves. #endif // -- Curve 11 -- #if Curves_formula == 11 //Cubic catmull float a = 1.00; //control point 1 float b = 0.00; //start point float c = 1.00; //endpoint float d = 0.20; //control point 2 x = 0.5 * ((-a + 3*b -3*c + d)*x*x*x + (2*a -5*b + 4*c - d)*x*x + (-a+c)*x + 2*b); //A customizable cubic catmull-rom spline #endif // -- Curve 12 -- #if Curves_formula == 12 //Cubic Bezier spline float a = 0.00; //start point float b = 0.00; //control point 1 float c = 1.00; //control point 2 float d = 1.00; //endpoint float r = (1-x); float r2 = r*r; float r3 = r2 * r; float x2 = x*x; float x3 = x2*x; //x = dot(float4(a,b,c,d),float4(r3,3*r2*x,3*r*x2,x3)); //x = a * r*r*r + r * (3 * b * r * x + 3 * c * x*x) + d * x*x*x; //x = a*(1-x)*(1-x)*(1-x) +(1-x) * (3*b * (1-x) * x + 3 * c * x*x) + d * x*x*x; x = a*(1-x)*(1-x)*(1-x) + 3*b*(1-x)*(1-x)*x + 3*c*(1-x)*x*x + d*x*x*x; #endif // -- Curve 13 -- #if Curves_formula == 13 //Cubic Bezier spline - alternative implementation. float3 a = float3(0.00,0.00,0.00); //start point float3 b = float3(0.25,0.15,0.85); //control point 1 float3 c = float3(0.75,0.85,0.15); //control point 2 float3 d = float3(1.00,1.00,1.00); //endpoint float3 ab = lerp(a,b,x); // point between a and b float3 bc = lerp(b,c,x); // point between b and c float3 cd = lerp(c,d,x); // point between c and d float3 abbc = lerp(ab,bc,x); // point between ab and bc float3 bccd = lerp(bc,cd,x); // point between bc and cd float3 dest = lerp(abbc,bccd,x); // point on the bezier-curve x = dest; #endif // -- Curve 14 -- #if Curves_formula == 14 x = 1.0 / (1.0 + exp(-(x * 10.0 - 5.0))); //alternative exp formula #endif /*-----------------------------------------------------------. / Joining of Luma and Chroma / '-----------------------------------------------------------*/ #if Curves_mode == 2 //Both Luma and Chroma float3 color = x; //if the curve should be applied to both Luma and Chroma colorInput.rgb = lerp(colorInput.rgb, color, Curves_contrast_blend); //Blend by Curves_contrast #elif Curves_mode == 1 //Only Chroma x = x * 2.0 - 1.0; //adjust the Chroma range back to -1 -> 1 float3 color = luma + x; //Luma + Chroma colorInput.rgb = lerp(colorInput.rgb, color, Curves_contrast_blend); //Blend by Curves_contrast #else // Curves_mode == 0 //Only Luma x = lerp(luma, x, Curves_contrast_blend); //Blend by Curves_contrast colorInput.rgb = x + chroma; //Luma + Chroma #endif //Return the result return colorInput; } /* //Working on a proper catmull-rom spline float catmullrom(float t, float p0, float p1, float p2, float p3) { 0.5 * ( (2 * p1) + (-p0 + p2) * x + (2 * p0 - 5 * p1 + 4 * p2 - p3) * t * t + (-p0 + 3 * p1 - 3 * p2 + p3) * x * x * x ); } //0.5 *( (2 * b) + (-a + c) * x + (2*a - 5*b + 4*c - d) * x*x +(-a + 3*b- 3*c + d) * x*x*x) //y = 1/2 *(x (-a *(x-1)^2+c *(-3 * x^2+4 * x+1)+d * x *(x-1))+b (3 * x^3-5 * x^2+2)) //reduce //a * x * (x * (1 - 0.5 * x) - 0.5) + b * ((1.5 * x - 2.5) * x*x + 1) + x * (x * (x * (0.5 * d - 1.5 * c) + 2 * c - 0.5 * d) + 0.5 * c) //horner */