| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370 |
- /**
- * Copyright (C) 2011 Jorge Jimenez (jorge@iryoku.com)
- * Copyright (C) 2011 Belen Masia (bmasia@unizar.es)
- * Copyright (C) 2011 Jose I. Echevarria (joseignacioechevarria@gmail.com)
- * Copyright (C) 2011 Fernando Navarro (fernandn@microsoft.com)
- * Copyright (C) 2011 Diego Gutierrez (diegog@unizar.es)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the following disclaimer
- * in the documentation and/or other materials provided with the
- * distribution:
- *
- * "Uses SMAA. Copyright (C) 2011 by Jorge Jimenez, Jose I. Echevarria,
- * Belen Masia, Fernando Navarro and Diego Gutierrez."
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
- * IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * The views and conclusions contained in the software and documentation are
- * those of the authors and should not be interpreted as representing official
- * policies, either expressed or implied, of the copyright holders.
- */
- /**
- * _______ ___ ___ ___ ___
- * / || \/ | / \ / \
- * | (---- | \ / | / ^ \ / ^ \
- * \ \ | |\/| | / /_\ \ / /_\ \
- * ----) | | | | | / _____ \ / _____ \
- * |_______/ |__| |__| /__/ \__\ /__/ \__\
- *
- * E N H A N C E D
- * S U B P I X E L M O R P H O L O G I C A L A N T I A L I A S I N G
- *
- * http://www.iryoku.com/smaa/
- *
- * Hi, welcome aboard!
- *
- * Here you'll find instructions to get the shader up and running as fast as
- * possible.
- *
- * The shader has three passes, chained together as follows:
- *
- * |input|------------------·
- * v |
- * [ SMAA*EdgeDetection ] |
- * v |
- * |edgesTex| |
- * v |
- * [ SMAABlendingWeightCalculation ] |
- * v |
- * |blendTex| |
- * v |
- * [ SMAANeighborhoodBlending ] <------·
- * v
- * |output|
- *
- * Note that each [pass] has its own vertex and pixel shader.
- *
- * You've three edge detection methods to choose from: luma, color or depth.
- * They represent different quality/performance and anti-aliasing/sharpness
- * tradeoffs, so our recommendation is for you to choose the one that best
- * suits your particular scenario:
- *
- * - Depth edge detection is usually the fastest but it may miss some edges.
- *
- * - Luma edge detection is usually more expensive than depth edge detection,
- * but catches visible edges that depth edge detection can miss.
- *
- * - Color edge detection is usually the most expensive one but catches
- * chroma-only edges.
- *
- * For quickstarters: just use luma edge detection.
- *
- * The general advice is to not rush the integration process and ensure each
- * step is done correctly (don't try to integrate SMAA T2x with predicated edge
- * detection from the start!). Ok then, let's go!
- *
- * 1. The first step is to create two RGBA temporal framebuffers for holding
- * |edgesTex| and |blendTex|.
- *
- * In DX10, you can use a RG framebuffer for the edges texture, but in our
- * experience it yields worse performance.
- *
- * On the Xbox 360, you can use the same framebuffer for resolving both
- * |edgesTex| and |blendTex|, as they aren't needed simultaneously.
- *
- * 2. Both temporal framebuffers |edgesTex| and |blendTex| must be cleared
- * each frame. Do not forget to clear the alpha channel!
- *
- * 3. The next step is loading the two supporting precalculated textures,
- * 'areaTex' and 'searchTex'. You'll find them in the 'Textures' folder as
- * C++ headers, and also as regular DDS files. They'll be needed for the
- * 'SMAABlendingWeightCalculation' pass.
- *
- * If you use the C++ headers, be sure to load them in the format specified
- * inside of them.
- *
- * 4. In DX9, all samplers must be set to linear filtering and clamp, with the
- * exception of 'searchTex', which must be set to point filtering.
- *
- * 5. All texture reads and buffer writes must be non-sRGB, with the exception
- * of the input read and the output write of input in
- * 'SMAANeighborhoodBlending' (and only in this pass!). If sRGB reads in
- * this last pass are not possible, the technique will work anyway, but
- * will perform antialiasing in gamma space.
- *
- * IMPORTANT: for best results the input read for the color/luma edge
- * detection should *NOT* be sRGB.
- *
- * 6. Before including SMAA.h you'll have to setup the framebuffer pixel size,
- * the target and any optional configuration defines. Optionally you can
- * use a preset.
- *
- * You have three targets available:
- * SMAA_HLSL_3
- * SMAA_HLSL_4
- * SMAA_HLSL_4_1
- * SMAA_GLSL_3 *
- * SMAA_GLSL_4 *
- *
- * * (See SMAA_ONLY_COMPILE_VS below).
- *
- * And four presets:
- * SMAA_PRESET_LOW (%60 of the quality)
- * SMAA_PRESET_MEDIUM (%80 of the quality)
- * SMAA_PRESET_HIGH (%95 of the quality)
- * SMAA_PRESET_ULTRA (%99 of the quality)
- *
- * For example:
- * #define SMAA_PIXEL_SIZE float2(1.0 / 1280.0, 1.0 / 720.0)
- * #define SMAA_HLSL_4 1
- * #define SMAA_PRESET_HIGH 1
- * #include "SMAA.h"
- *
- * 7. Then, you'll have to setup the passes as indicated in the scheme above.
- * You can take a look into SMAA.fx, to see how we did it for our demo.
- * Checkout the function wrappers, you may want to copy-paste them!
- *
- * 8. It's recommended to validate the produced |edgesTex| and |blendTex|.
- * It's advised to not continue with the implementation until both buffers
- * are verified to produce identical results to our reference demo.
- *
- * 9. After you get the last pass to work, it's time to optimize. You'll have
- * to initialize a stencil buffer in the first pass (discard is already in
- * the code), then mask execution by using it the second pass. The last
- * pass should be executed in all pixels.
- *
- *
- * After this point you can choose to enable predicated thresholding,
- * temporal supersampling and motion blur integration:
- *
- * a) If you want to use predicated thresholding, take a look into
- * SMAA_PREDICATION; you'll need to pass an extra texture in the edge
- * detection pass.
- *
- * b) If you want to enable temporal supersampling:
- *
- * 1. The first step is to render using subpixel jitters. I won't go into
- * detail, but it's as simple as moving each vertex position in the
- * vertex shader, you can check how we do it in our DX10 demo.
- *
- * 2. Then, you must setup the temporal resolve. You may want to take a look
- * into SMAAResolve for resolving 2x modes. After you get it working, you'll
- * probably see ghosting everywhere. But fear not, you can enable the
- * CryENGINE temporal reprojection by setting the SMAA_REPROJECTION macro.
- *
- * 3. The next step is to apply SMAA to each subpixel jittered frame, just as
- * done for 1x.
- *
- * 4. At this point you should already have something usable, but for best
- * results the proper area textures must be set depending on current jitter.
- * For this, the parameter 'subsampleIndices' of
- * 'SMAABlendingWeightCalculationPS' must be set as follows, for our T2x
- * mode:
- *
- * @SUBSAMPLE_INDICES
- *
- * | jitter | subsampleIndices |
- * +------------------------+------------------------|
- * | float2(-0.25f, 0.25f) | int4(1, 1, 1, 0) |
- * | float2( 0.25f, -0.25f) | int4(2, 2, 2, 0) |
- * OR
- * +------------------------+------------------------|
- * | float2( 0.25f, 0.25f) | int4(2, 1, 0, 2) |
- * | float2(-0.25f, -0.25f) | int4(1, 2, 0, 1) |
- *
- * These jitter positions assume a bottom-to-top y axis.
- *
- * More information about temporal supersampling here:
- * http://iryoku.com/aacourse/downloads/13-Anti-Aliasing-Methods-in-CryENGINE-3.pdf
- *
- * c) If motion blur is used, you may want to do the edge detection pass
- * together with motion blur. This has two advantages:
- *
- * 1. Pixels under heavy motion can be omitted from the edge detection process.
- * For these pixels we can just store "no edge", as motion blur will take
- * care of them.
- * 2. The center pixel tap is reused.
- *
- * Note that in this case depth testing should be used instead of stenciling,
- * as we have to write all the pixels in the motion blur pass.
- *
- * That's it!
- */
- //-----------------------------------------------------------------------------
- // SMAA Presets
- #if SMAA_PRESET_LOW == 1
- #define SMAA_THRESHOLD 0.15
- #define SMAA_MAX_SEARCH_STEPS 4
- #define SMAA_MAX_SEARCH_STEPS_DIAG 0
- #define SMAA_CORNER_ROUNDING 100
- #elif SMAA_PRESET_MEDIUM == 1
- #define SMAA_THRESHOLD 0.1
- #define SMAA_MAX_SEARCH_STEPS 8
- #define SMAA_MAX_SEARCH_STEPS_DIAG 0
- #define SMAA_CORNER_ROUNDING 100
- #elif SMAA_PRESET_HIGH == 1
- #define SMAA_THRESHOLD 0.1
- #define SMAA_MAX_SEARCH_STEPS 16
- #define SMAA_MAX_SEARCH_STEPS_DIAG 8
- #define SMAA_CORNER_ROUNDING 25
- #elif SMAA_PRESET_ULTRA == 1
- #define SMAA_THRESHOLD 0.05
- #define SMAA_MAX_SEARCH_STEPS 32
- #define SMAA_MAX_SEARCH_STEPS_DIAG 16
- #define SMAA_CORNER_ROUNDING 25
- #endif
- //-----------------------------------------------------------------------------
- // Configurable Defines
- /**
- * SMAA_THRESHOLD specifies the threshold or sensitivity to edges.
- * Lowering this value you will be able to detect more edges at the expense of
- * performance.
- *
- * Range: [0, 0.5]
- * 0.1 is a reasonable value, and allows to catch most visible edges.
- * 0.05 is a rather overkill value, that allows to catch 'em all.
- *
- * If temporal supersampling is used, 0.2 could be a reasonable value, as low
- * contrast edges are properly filtered by just 2x.
- */
- #ifndef SMAA_THRESHOLD
- #define SMAA_THRESHOLD 0.1
- #endif
- /**
- * SMAA_DEPTH_THRESHOLD specifies the threshold for depth edge detection.
- *
- * Range: depends on the depth range of the scene.
- */
- #ifndef SMAA_DEPTH_THRESHOLD
- #define SMAA_DEPTH_THRESHOLD (0.1 * SMAA_THRESHOLD)
- #endif
- /**
- * SMAA_MAX_SEARCH_STEPS specifies the maximum steps performed in the
- * horizontal/vertical pattern searches, at each side of the pixel.
- *
- * In number of pixels, it's actually the double. So the maximum line length
- * perfectly handled by, for example 16, is 64 (by perfectly, we meant that
- * longer lines won't look as good, but still antialiased).
- *
- * Range: [0, 98]
- */
- #ifndef SMAA_MAX_SEARCH_STEPS
- #define SMAA_MAX_SEARCH_STEPS 16
- #endif
- /**
- * SMAA_MAX_SEARCH_STEPS_DIAG specifies the maximum steps performed in the
- * diagonal pattern searches, at each side of the pixel. In this case we jump
- * one pixel at time, instead of two.
- *
- * Range: [0, 20]; set it to 0 to disable diagonal processing.
- *
- * On high-end machines it is cheap (between a 0.8x and 0.9x slower for 16
- * steps), but it can have a significant impact on older machines.
- */
- #ifndef SMAA_MAX_SEARCH_STEPS_DIAG
- #define SMAA_MAX_SEARCH_STEPS_DIAG 8
- #endif
- /**
- * SMAA_CORNER_ROUNDING specifies how much sharp corners will be rounded.
- *
- * Range: [0, 100]; set it to 100 to disable corner detection.
- */
- #ifndef SMAA_CORNER_ROUNDING
- #define SMAA_CORNER_ROUNDING 25
- #endif
- /**
- * Predicated thresholding allows to better preserve texture details and to
- * improve performance, by decreasing the number of detected edges using an
- * additional buffer like the light accumulation buffer, object ids or even the
- * depth buffer (the depth buffer usage may be limited to indoor or short range
- * scenes).
- *
- * It locally decreases the luma or color threshold if an edge is found in an
- * additional buffer (so the global threshold can be higher).
- *
- * This method was developed by Playstation EDGE MLAA team, and used in
- * Killzone 3, by using the light accumulation buffer. More information here:
- * http://iryoku.com/aacourse/downloads/06-MLAA-on-PS3.pptx
- */
- #ifndef SMAA_PREDICATION
- #define SMAA_PREDICATION 0
- #endif
- /**
- * Threshold to be used in the additional predication buffer.
- *
- * Range: depends on the input, so you'll have to find the magic number that
- * works for you.
- */
- #ifndef SMAA_PREDICATION_THRESHOLD
- #define SMAA_PREDICATION_THRESHOLD 0.01
- #endif
- /**
- * How much to scale the global threshold used for luma or color edge
- * detection when using predication.
- *
- * Range: [1, 5]
- */
- #ifndef SMAA_PREDICATION_SCALE
- #define SMAA_PREDICATION_SCALE 2.0
- #endif
- /**
- * How much to locally decrease the threshold.
- *
- * Range: [0, 1]
- */
- #ifndef SMAA_PREDICATION_STRENGTH
- #define SMAA_PREDICATION_STRENGTH 0.4
- #endif
- /**
- * Temporal reprojection allows to remove ghosting artifacts when using
- * temporal supersampling. We use the CryEngine 3 method which also introduces
- * velocity weighting. This feature is of extreme importance for totally
- * removing ghosting. More information here:
- * http://iryoku.com/aacourse/downloads/13-Anti-Aliasing-Methods-in-CryENGINE-3.pdf
- *
- * Note that you'll need to setup a velocity buffer for enabling reprojection.
- * For static geometry, saving the previous depth buffer is a viable
- * alternative.
- */
- #ifndef SMAA_REPROJECTION
- #define SMAA_REPROJECTION 0
- #endif
- /**
- * SMAA_REPROJECTION_WEIGHT_SCALE controls the velocity weighting. It allows to
- * remove ghosting trails behind the moving object, which are not removed by
- * just using reprojection. Using low values will exhibit ghosting, while using
- * high values will disable temporal supersampling under motion.
- *
- * Behind the scenes, velocity weighting removes temporal supersampling when
- * the velocity of the subsamples differs (meaning they are different objects).
- *
- * Range: [0, 80]
- */
- #define SMAA_REPROJECTION_WEIGHT_SCALE 30.0
- /**
- * In the last pass we leverage bilinear filtering to avoid some lerps.
- * However, bilinear filtering is done in gamma space in DX9, under DX9
- * hardware (but not in DX9 code running on DX10 hardware), which gives
- * inaccurate results.
- *
- * So, if you are in DX9, under DX9 hardware, and do you want accurate linear
- * blending, you must set this flag to 1.
- *
- * It's ignored when using SMAA_HLSL_4, and of course, only has sense when
- * using sRGB read and writes on the last pass.
- */
- #ifndef SMAA_DIRECTX9_LINEAR_BLEND
- #define SMAA_DIRECTX9_LINEAR_BLEND 0
- #endif
- /**
- * On ATI compilers, discard cannot be used in vertex shaders. Thus, they need
- * to be compiled separately. These macros allow to easily accomplish it.
- */
- #ifndef SMAA_ONLY_COMPILE_VS
- #define SMAA_ONLY_COMPILE_VS 0
- #endif
- #ifndef SMAA_ONLY_COMPILE_PS
- #define SMAA_ONLY_COMPILE_PS 0
- #endif
- //-----------------------------------------------------------------------------
- // Non-Configurable Defines
- #ifndef SMAA_AREATEX_MAX_DISTANCE
- #define SMAA_AREATEX_MAX_DISTANCE 16
- #endif
- #ifndef SMAA_AREATEX_MAX_DISTANCE_DIAG
- #define SMAA_AREATEX_MAX_DISTANCE_DIAG 20
- #endif
- #define SMAA_AREATEX_PIXEL_SIZE (1.0 / float2(160.0, 240.0))
- #define SMAA_AREATEX_SUBTEX_SIZE (1.0 / 3.0)
- //-----------------------------------------------------------------------------
- // Porting Functions
- #if SMAA_HLSL_3 == 1
- #define SMAATexture2D sampler2D
- //#define SMAASampleLevelZero(tex, coord) tex2Dlod(tex, float4(coord, 0.0, 0.0))
- #define SMAASampleLevelZero(tex, coord) tex2Dlod(tex, float4(coord, coord)) //CJ nice reduction of ALU
- //#define SMAASampleLevelZeroPoint(tex, coord) tex2Dlod(tex, float4(coord, 0.0, 0.0))
- #define SMAASampleLevelZeroPoint(tex, coord) tex2Dlod(tex, float4(coord, coord)) //CJ nice reduction of ALU
- #define SMAASample(tex, coord) tex2D(tex, coord)
- #define SMAASamplePoint(tex, coord) tex2D(tex, coord)
- //#define SMAASampleLevelZeroOffset(tex, coord, offset) tex2Dlod(tex, float4(coord + offset * SMAA_PIXEL_SIZE, 0.0, 0.0))
- #define SMAASampleLevelZeroOffset(tex, coord, offset) tex2Dlod(tex, float4(coord + offset * SMAA_PIXEL_SIZE,coord + offset * SMAA_PIXEL_SIZE)) //CJ nice reduction of ALU
- #define SMAASampleOffset(tex, coord, offset) tex2D(tex, coord + offset * SMAA_PIXEL_SIZE)
- #define SMAALerp(a, b, t) lerp(a, b, t)
- #define SMAASaturate(a) saturate(a)
- #define SMAAMad(a, b, c) mad(a, b, c)
- #define SMAA_FLATTEN [flatten]
- #define SMAA_BRANCH [branch]
- #endif
- #if SMAA_HLSL_4 == 1 || SMAA_HLSL_4_1 == 1
- SamplerState LinearSampler { Filter = MIN_MAG_LINEAR_MIP_POINT; AddressU = Clamp; AddressV = Clamp; };
- SamplerState PointSampler { Filter = MIN_MAG_MIP_POINT; AddressU = Clamp; AddressV = Clamp; };
- #define SMAATexture2D Texture2D
- //#define SMAASampleLevelZero(tex, coord) tex.SampleLevel(LinearSampler, coord, 0)
- #define SMAASampleLevelZero(tex, coord) tex.SampleLevel(LinearSampler, coord, coord.x) //CJ
- //#define SMAASampleLevelZeroPoint(tex, coord) tex.SampleLevel(PointSampler, coord, 0)
- #define SMAASampleLevelZeroPoint(tex, coord) tex.SampleLevel(PointSampler, coord, coord.x) //CJ
- //#define SMAASample(tex, coord) SMAASampleLevelZero(tex, coord)
- #define SMAASample(tex, coord) tex.Sample(LinearSampler, coord) //CJ
- //#define SMAASamplePoint(tex, coord) SMAASampleLevelZeroPoint(tex, coord)
- #define SMAASamplePoint(tex, coord) tex.Sample(PointSampler, coord) //CJ
- //#define SMAASampleLevelZeroOffset(tex, coord, offset) tex.SampleLevel(LinearSampler, coord, 0, offset)
- #define SMAASampleLevelZeroOffset(tex, coord, offset) tex.SampleLevel(LinearSampler, coord, coord.x, offset) //CJ
- //#define SMAASampleOffset(tex, coord, offset) SMAASampleLevelZeroOffset(tex, coord, offset)
- #define SMAASampleOffset(tex, coord, offset) tex.Sample(LinearSampler, coord, offset) //CJ
- #define SMAALerp(a, b, t) lerp(a, b, t)
- #define SMAASaturate(a) saturate(a)
- #define SMAAMad(a, b, c) mad(a, b, c)
- #define SMAA_FLATTEN [flatten]
- #define SMAA_BRANCH [branch]
- #endif
- #if SMAA_HLSL_4_1 == 1
- #define SMAAGather(tex, coord) tex.Gather(LinearSampler, coord, 0)
- #endif
- #if SMAA_GLSL_3 == 1 || SMAA_GLSL_4 == 1
- #define SMAATexture2D sampler2D
- #define SMAASampleLevelZero(tex, coord) textureLod(tex, coord, 0.0)
- #define SMAASampleLevelZeroPoint(tex, coord) textureLod(tex, coord, 0.0)
- #define SMAASample(tex, coord) texture(tex, coord)
- #define SMAASamplePoint(tex, coord) texture(tex, coord)
- #define SMAASampleLevelZeroOffset(tex, coord, offset) textureLodOffset(tex, coord, 0.0, offset)
- #define SMAASampleOffset(tex, coord, offset) texture(tex, coord, offset)
- #define SMAALerp(a, b, t) mix(a, b, t)
- #define SMAASaturate(a) clamp(a, 0.0, 1.0)
- #define SMAA_FLATTEN
- #define SMAA_BRANCH
- #define float2 vec2
- #define float3 vec3
- #define float4 vec4
- #define int2 ivec2
- #define int3 ivec3
- #define int4 ivec4
- #endif
- #if SMAA_GLSL_3 == 1
- #define SMAAMad(a, b, c) (a * b + c)
- #endif
- #if SMAA_GLSL_4 == 1
- #define SMAAMad(a, b, c) fma(a, b, c)
- #define SMAAGather(tex, coord) textureGather(tex, coord)
- #endif
- //-----------------------------------------------------------------------------
- // Misc functions
- /**
- * Gathers current pixel, and the top-left neighbors.
- */
- float3 SMAAGatherNeighbours(float2 texcoord,
- float4 offset[3],
- SMAATexture2D tex) {
- #if SMAA_HLSL_4_1 == 1
- return SMAAGather(tex, texcoord + SMAA_PIXEL_SIZE * float2(-0.5, -0.5)).grb;
- #else
- float P = SMAASample(tex, texcoord).r;
- float Pleft = SMAASample(tex, offset[0].xy).r;
- float Ptop = SMAASample(tex, offset[0].zw).r;
- return float3(P, Pleft, Ptop);
- #endif
- }
- /**
- * Adjusts the threshold by means of predication.
- */
- float2 SMAACalculatePredicatedThreshold(float2 texcoord,
- float4 offset[3],
- SMAATexture2D colorTex,
- SMAATexture2D predicationTex) {
- float3 neighbours = SMAAGatherNeighbours(texcoord, offset, predicationTex);
- float2 delta = abs(neighbours.xx - float2(neighbours.y, neighbours.z));
- float2 edges = step(SMAA_PREDICATION_THRESHOLD, delta);
- return SMAA_PREDICATION_SCALE * SMAA_THRESHOLD * (1.0 - SMAA_PREDICATION_STRENGTH * edges);
- }
- #if SMAA_ONLY_COMPILE_PS == 0
- //-----------------------------------------------------------------------------
- // Vertex Shaders
- /**
- * Edge Detection Vertex Shader
- */
- void SMAAEdgeDetectionVS(float4 position,
- out float4 svPosition,
- inout float2 texcoord,
- out float4 offset[3]) {
- svPosition = position;
- offset[0] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4(-1.0, 0.0, 0.0, -1.0);
- offset[1] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4( 1.0, 0.0, 0.0, 1.0);
- offset[2] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4(-2.0, 0.0, 0.0, -2.0);
- }
- /**
- * Blend Weight Calculation Vertex Shader
- */
- void SMAABlendWeightCalculationVS(float4 position,
- out float4 svPosition,
- inout float2 texcoord,
- out float2 pixcoord,
- out float4 offset[3]) {
- svPosition = position;
- pixcoord = texcoord / SMAA_PIXEL_SIZE;
- // We will use these offsets for the searches later on (see @PSEUDO_GATHER4):
- offset[0] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4(-0.25, -0.125, 1.25, -0.125);
- offset[1] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4(-0.125, -0.25, -0.125, 1.25);
- // And these for the searches, they indicate the ends of the loops:
- offset[2] = float4(offset[0].xz, offset[1].yw) +
- float4(-2.0, 2.0, -2.0, 2.0) *
- SMAA_PIXEL_SIZE.xxyy * float(SMAA_MAX_SEARCH_STEPS);
- }
- /**
- * Neighborhood Blending Vertex Shader
- */
- void SMAANeighborhoodBlendingVS(float4 position,
- out float4 svPosition,
- inout float2 texcoord,
- out float4 offset[2]) {
- svPosition = position;
- offset[0] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4(-1.0, 0.0, 0.0, -1.0);
- offset[1] = texcoord.xyxy + SMAA_PIXEL_SIZE.xyxy * float4( 1.0, 0.0, 0.0, 1.0);
- }
- /**
- * Resolve Vertex Shader
- */
- void SMAAResolveVS(float4 position,
- out float4 svPosition,
- inout float2 texcoord) {
- svPosition = position;
- }
- #endif // SMAA_ONLY_COMPILE_PS == 0
- #if SMAA_ONLY_COMPILE_VS == 0
- //-----------------------------------------------------------------------------
- // Edge Detection Pixel Shaders (First Pass)
- /**
- * Luma Edge Detection
- *
- * IMPORTANT NOTICE: luma edge detection requires gamma-corrected colors, and
- * thus 'colorTex' should be a non-sRGB texture.
- */
- float4 SMAALumaEdgeDetectionPS(float2 texcoord,
- float4 offset[3],
- SMAATexture2D colorTex
- #if SMAA_PREDICATION == 1
- , SMAATexture2D predicationTex
- #endif
- ) {
- // Calculate the threshold:
- #if SMAA_PREDICATION == 1
- float2 threshold = SMAACalculatePredicatedThreshold(texcoord, offset, colorTex, predicationTex);
- #else
- float2 threshold = float2(SMAA_THRESHOLD, SMAA_THRESHOLD);
- #endif
- // Calculate lumas:
- float3 weights = float3(0.2126, 0.7152, 0.0722);
- float L = dot(SMAASample(colorTex, texcoord).rgb, weights);
- float Lleft = dot(SMAASample(colorTex, offset[0].xy).rgb, weights);
- float Ltop = dot(SMAASample(colorTex, offset[0].zw).rgb, weights);
- // We do the usual threshold:
- float4 delta;
- delta.xy = abs(L - float2(Lleft, Ltop));
- float2 edges = step(threshold, delta.xy);
- // Then discard if there is no edge:
- //if (dot(edges, float2(1.0, 1.0)) == 0.0)
- //SMAA_BRANCH if ((edges.x + edges.y) == 0.0) //CJ
- SMAA_BRANCH if (edges.x == -edges.y) //CJ
- {
- discard;
- }
- else //CJ
- { //CJ
- // Calculate right and bottom deltas:
- float Lright = dot(SMAASample(colorTex, offset[1].xy).rgb, weights);
- float Lbottom = dot(SMAASample(colorTex, offset[1].zw).rgb, weights);
- delta.zw = abs(L - float2(Lright, Lbottom));
- /*
- // Calculate the maximum delta in the direct neighborhood:
- float2 maxDelta = max(delta.xy, delta.zw);
- maxDelta = max(maxDelta.xx, maxDelta.yy);
- */
- // Calculate the maximum delta in the direct neighborhood: //CJ
- float2 maxDelta = max(delta.xy, delta.zw);
- maxDelta.x = max(maxDelta.x, maxDelta.y);
- /*
- // Calculate the maximum delta in the direct neighborhood:
- float2 maxDelta;
- maxDelta.x = max(delta.x, delta.y);
- maxDelta.y = max(delta.z, delta.w);
- maxDelta.x = max(maxDelta.x, maxDelta.y);
- */
- if (!any(abs(maxDelta.xx) - abs(2.0 * delta.xy)))
- //if ((2.0 * delta.x) > maxDelta.x || (2.0 * delta.y) > maxDelta.x)
- {
- // Calculate left-left and top-top deltas:
- float Lleftleft = dot(SMAASample(colorTex, offset[2].xy).rgb, weights);
- float Ltoptop = dot(SMAASample(colorTex, offset[2].zw).rgb, weights);
- delta.zw = abs(float2(Lleft, Ltop) - float2(Lleftleft, Ltoptop));
- /*
- // Calculate the final maximum delta:
- maxDelta = max(maxDelta.xy, delta.zw);
- */
- // Calculate the final maximum delta:
- maxDelta = max(maxDelta.xx, delta.zw); //CJ
- } //CJ
- /**
- * Each edge with a delta in luma of less than 50% of the maximum luma
- * surrounding this pixel is discarded. This allows to eliminate spurious
- * crossing edges, and is based on the fact that, if there is too much
- * contrast in a direction, that will hide contrast in the other
- * neighbors.
- * This is done after the discard intentionally as this situation doesn't
- * happen too frequently (but it's important to do as it prevents some
- * edges from going undetected).
- */
- //edges.xy *= step(0.5 * maxDelta, delta.xy);
- edges.xy *= step(maxDelta, 2.0 * delta.xy); //CJ
- } //CJ
- return float4(edges, 0.0, 0.0);
- }
- /**
- * Color Edge Detection
- *
- * IMPORTANT NOTICE: color edge detection requires gamma-corrected colors, and
- * thus 'colorTex' should be a non-sRGB texture.
- */
- float4 SMAAColorEdgeDetectionPS(float2 texcoord,
- float4 offset[3],
- SMAATexture2D colorTex
- #if SMAA_PREDICATION == 1
- , SMAATexture2D predicationTex
- #endif
- ) {
- // Calculate the threshold:
- #if SMAA_PREDICATION == 1
- float2 threshold = SMAACalculatePredicatedThreshold(texcoord, offset, colorTex, predicationTex);
- #else
- float2 threshold = float2(SMAA_THRESHOLD, SMAA_THRESHOLD);
- #endif
- // Calculate color deltas:
- float4 delta;
- float3 C = SMAASample(colorTex, texcoord).rgb;
- float3 Cleft = SMAASample(colorTex, offset[0].xy).rgb;
- float3 t = abs(C - Cleft);
- delta.x = max(max(t.r, t.g), t.b);
- float3 Ctop = SMAASample(colorTex, offset[0].zw).rgb;
- t = abs(C - Ctop);
- delta.y = max(max(t.r, t.g), t.b);
- // We do the usual threshold:
- float2 edges = step(threshold, delta.xy);
- // Then discard if there is no edge:
- //if (dot(edges, float2(1.0, 1.0)) == 0.0)
- if ((edges.x + edges.y) == 0.0) //CJ - branching here seems to gain more speed than is lost by the overhead of branching. This would depend on the scene though.
- //SMAA_BRANCH if (edges.x == -edges.y)
- {
- discard;
- }
- else //CJ
- { //CJ
- // Calculate right and bottom deltas:
- float3 Cright = SMAASample(colorTex, offset[1].xy).rgb;
- t = abs(C - Cright);
- delta.z = max(max(t.r, t.g), t.b);
- float3 Cbottom = SMAASample(colorTex, offset[1].zw).rgb;
- t = abs(C - Cbottom);
- delta.w = max(max(t.r, t.g), t.b);
- // Calculate the maximum delta in the direct neighborhood:
- float maxDelta = max(max(max(delta.x, delta.y), delta.z), delta.w);
- // Calculate left-left and top-top deltas:
- float3 Cleftleft = SMAASample(colorTex, offset[2].xy).rgb;
- t = abs(C - Cleftleft);
- delta.z = max(max(t.r, t.g), t.b);
- float3 Ctoptop = SMAASample(colorTex, offset[2].zw).rgb;
- t = abs(C - Ctoptop);
- delta.w = max(max(t.r, t.g), t.b);
- // Calculate the final maximum delta:
- maxDelta = max(max(maxDelta, delta.z), delta.w);
- // Local contrast adaptation in action:
- //edges.xy *= step(0.5 * maxDelta, delta.xy);
- edges.xy *= step(maxDelta, delta.xy * 2.0); //CJ a little faster
- } //CJ
- return float4(edges, 0.0, 0.0);
- }
- /**
- * Depth Edge Detection
- */
- float4 SMAADepthEdgeDetectionPS(float2 texcoord,
- float4 offset[3],
- SMAATexture2D depthTex) {
- float3 neighbours = SMAAGatherNeighbours(texcoord, offset, depthTex);
- float2 delta = abs(neighbours.xx - float2(neighbours.y, neighbours.z));
- float2 edges = step(SMAA_DEPTH_THRESHOLD, delta);
- //if (dot(edges, float2(1.0, 1.0)) == 0.0)
- //if ((edges.x + edges.y) == 0.0) //CJ
- if (edges.x == -edges.y) //CJ
- discard;
- return float4(edges, 0.0, 0.0);
- }
- //-----------------------------------------------------------------------------
- // Diagonal Search Functions
- #if SMAA_MAX_SEARCH_STEPS_DIAG > 0 || SMAA_FORCE_DIAGONAL_DETECTION == 1
- /**
- * These functions allows to perform diagonal pattern searches.
- */
- /*
- float SMAASearchDiag1(SMAATexture2D edgesTex, float2 texcoord, float2 dir, float c) {
- //texcoord += dir * SMAA_PIXEL_SIZE;
- texcoord = dir * SMAA_PIXEL_SIZE + texcoord; //CJ - no change
- float2 e = float2(0.0, 0.0);
- float i;
- for (i = 0.0; i < float(SMAA_MAX_SEARCH_STEPS_DIAG); i++) {
- e.rg = SMAASampleLevelZero(edgesTex, texcoord).rg;
- //SMAA_FLATTEN if (dot(e, float2(1.0, 1.0)) < 1.9) break;
- SMAA_FLATTEN if ((e.r + e.g) < 1.9) break; //CJ fewer amd ASM
- texcoord = dir * SMAA_PIXEL_SIZE + texcoord; //CJ - no change
- }
- return float(e.g > 0.9) * c + i; //CJ no change
- }
- */
- float SMAASearchDiag1(SMAATexture2D edgesTex, float2 texcoord, float2 dir, float c) { //CJ
- float2 e = float2(0.0, 0.0);
- float i = 0.0;
- float2 thisway = dir * SMAA_PIXEL_SIZE;
- texcoord = thisway + texcoord; //CJ - no change
- [fastopt] //not glsl compatible I think
- while (i < float(SMAA_MAX_SEARCH_STEPS_DIAG)) { //hmm I'm not sure GLSL can do while loops - also a do while loop might be better
- e.rg = SMAASampleLevelZero(edgesTex, texcoord).rg;
- SMAA_FLATTEN if ((e.r + e.g) < 1.9) break; //CJ fewer amd ASM - no fewer cycles
- texcoord = thisway + texcoord; //CJ - no change
- i++;
- }
- return float(e.g > 0.9) * c + i; //CJ no change
- }
- float SMAASearchDiag2(SMAATexture2D edgesTex, float2 texcoord, float2 dir, float c) {
- texcoord += dir * SMAA_PIXEL_SIZE;
- float2 e = float2(0.0, 0.0);
- float i;
- for (i = 0.0; i < float(SMAA_MAX_SEARCH_STEPS_DIAG); i++) {
- e.g = SMAASampleLevelZero(edgesTex, texcoord).g;
- e.r = SMAASampleLevelZeroOffset(edgesTex, texcoord, int2(1, 0)).r;
- //SMAA_FLATTEN if (dot(e, float2(1.0, 1.0)) < 1.9) break;
- SMAA_FLATTEN if ((e.r + e.g) < 1.9) break; //CJ fewer amd ASM - no fewer cycles,but possible performance gain - check
- texcoord = dir * SMAA_PIXEL_SIZE + texcoord; //CJ - no change
- }
- return i + float(e.g > 0.9) * c;
- }
- /**
- * Similar to SMAAArea, this calculates the area corresponding to a certain
- * diagonal distance and crossing edges 'e'.
- */
- float2 SMAAAreaDiag(SMAATexture2D areaTex, float2 dist, float2 e, float offset) {
- float2 texcoord = float(SMAA_AREATEX_MAX_DISTANCE_DIAG) * e + dist;
- // We do a scale and bias for mapping to texel space:
- texcoord = SMAA_AREATEX_PIXEL_SIZE * texcoord + (0.5 * SMAA_AREATEX_PIXEL_SIZE);
- // Diagonal areas are on the second half of the texture:
- texcoord.x += 0.5;
- // Move to proper place, according to the subpixel offset:
- texcoord.y += SMAA_AREATEX_SUBTEX_SIZE * offset;
- // Do it!
- #if SMAA_HLSL_3 == 1
- return SMAASampleLevelZero(areaTex, texcoord).ra;
- #else
- return SMAASampleLevelZero(areaTex, texcoord).rg;
- #endif
- }
- /**
- * This searches for diagonal patterns and returns the corresponding weights.
- */
- float2 SMAACalculateDiagWeights(SMAATexture2D edgesTex, SMAATexture2D areaTex, float2 texcoord, float2 e, int4 subsampleIndices) {
- float2 weights = float2(0.0, 0.0);
- float2 d;
- d.x = e.r > 0.0? SMAASearchDiag1(edgesTex, texcoord, float2(-1.0, 1.0), 1.0) : 0.0; //CJ TODO try e.r ? instead of e.r > 0.0?
- d.y = SMAASearchDiag1(edgesTex, texcoord, float2(1.0, -1.0), 0.0);
- SMAA_BRANCH
- if (d.r + d.g > 2.0) { // d.r + d.g + 1 > 3
- float4 coords = SMAAMad(float4(-d.r, d.r, d.g, -d.g), SMAA_PIXEL_SIZE.xyxy, texcoord.xyxy);
- float4 c;
- c.x = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(-1, 0)).g;
- c.y = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2( 0, 0)).r;
- c.z = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2( 1, 0)).g;
- c.w = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2( 1, -1)).r;
- float2 e = 2.0 * c.xz + c.yw;
- float t = float(SMAA_MAX_SEARCH_STEPS_DIAG) - 1.0;
- e *= step(d.rg, float2(t, t));
- weights += SMAAAreaDiag(areaTex, d, e, float(subsampleIndices.z));
- }
- d.x = SMAASearchDiag2(edgesTex, texcoord, float2(-1.0, -1.0), 0.0);
- float right = SMAASampleLevelZeroOffset(edgesTex, texcoord, int2(1, 0)).r;
- d.y = right > 0.0? SMAASearchDiag2(edgesTex, texcoord, float2(1.0, 1.0), 1.0) : 0.0;
- SMAA_BRANCH
- if (d.r + d.g > 2.0) { // d.r + d.g + 1 > 3
- float4 coords = SMAAMad(float4(-d.r, -d.r, d.g, d.g), SMAA_PIXEL_SIZE.xyxy, texcoord.xyxy);
- float4 c;
- c.x = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(-1, 0)).g;
- c.y = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2( 0, -1)).r;
- c.zw = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2( 1, 0)).gr;
- float2 e = 2.0 * c.xz + c.yw;
- float t = float(SMAA_MAX_SEARCH_STEPS_DIAG) - 1.0;
- e *= step(d.rg, float2(t, t));
- weights += SMAAAreaDiag(areaTex, d, e, float(subsampleIndices.w)).gr;
- }
- return weights;
- }
- #endif
- //-----------------------------------------------------------------------------
- // Horizontal/Vertical Search Functions
- /**
- * This allows to determine how much length should we add in the last step
- * of the searches. It takes the bilinearly interpolated edge (see
- * @PSEUDO_GATHER4), and adds 0, 1 or 2, depending on which edges and
- * crossing edges are active.
- */
- float SMAASearchLength(SMAATexture2D searchTex, float2 e, float bias, float scale) {
- // Not required if searchTex accesses are set to point:
- // float2 SEARCH_TEX_PIXEL_SIZE = 1.0 / float2(66.0, 33.0);
- // e = float2(bias, 0.0) + 0.5 * SEARCH_TEX_PIXEL_SIZE +
- // e * float2(scale, 1.0) * float2(64.0, 32.0) * SEARCH_TEX_PIXEL_SIZE;
- e.r = e.r * scale + bias; //CJ
- return 255.0 * SMAASampleLevelZeroPoint(searchTex, e).r;
- }
- /**
- * Horizontal/vertical search functions for the 2nd pass.
- */
- float SMAASearchXLeft(SMAATexture2D edgesTex, SMAATexture2D searchTex, float2 texcoord, float end) {
- /**
- * @PSEUDO_GATHER4
- * This texcoord has been offset by (-0.25, -0.125) in the vertex shader to
- * sample between edge, thus fetching four edges in a row.
- * Sampling with different offsets in each direction allows to disambiguate
- * which edges are active from the four fetched ones.
- */
- float2 e = float2(0.0, 1.0);
- while (texcoord.x > end &&
- e.g > 0.8281 && // Is there some edge not activated?
- e.r == 0.0) { // Or is there a crossing edge that breaks the line?
- e = SMAASampleLevelZero(edgesTex, texcoord).rg;
- texcoord -= float2(2.0, 0.0) * SMAA_PIXEL_SIZE;
- //texcoord = float2(-2.0, 0.0) * SMAA_PIXEL_SIZE + texcoord; //CJ - no change
- }
- // We correct the previous (-0.25, -0.125) offset we applied:
- texcoord.x += 0.25 * SMAA_PIXEL_SIZE.x;
- // The searches are bias by 1, so adjust the coords accordingly:
- texcoord.x += SMAA_PIXEL_SIZE.x;
- // Disambiguate the length added by the last step:
- texcoord.x += 2.0 * SMAA_PIXEL_SIZE.x; // Undo last step
- //texcoord.x = 3.25 * SMAA_PIXEL_SIZE.x + texcoord.x; //CJ
- //texcoord.x -= SMAA_PIXEL_SIZE.x * SMAASearchLength(searchTex, e, 0.0, 0.5);
- texcoord.x = -SMAA_PIXEL_SIZE.x * SMAASearchLength(searchTex, e, 0.0, 0.5) + texcoord.x; //CJ
- return texcoord.x;
- }
- float SMAASearchXRight(SMAATexture2D edgesTex, SMAATexture2D searchTex, float2 texcoord, float end) {
- float2 e = float2(0.0, 1.0);
- while (texcoord.x < end &&
- e.g > 0.8281 && // Is there some edge not activated?
- e.r == 0.0) { // Or is there a crossing edge that breaks the line?
- e = SMAASampleLevelZero(edgesTex, texcoord).rg;
- //texcoord += float2(2.0, 0.0) * SMAA_PIXEL_SIZE;
- texcoord = float2(2.0, 0.0) * SMAA_PIXEL_SIZE + texcoord; //CJ - no change
- }
- texcoord.x -= 0.25 * SMAA_PIXEL_SIZE.x;
- texcoord.x -= SMAA_PIXEL_SIZE.x;
- texcoord.x -= 2.0 * SMAA_PIXEL_SIZE.x;
- //texcoord.x += SMAA_PIXEL_SIZE.x * SMAASearchLength(searchTex, e, 0.5, 0.5);
- texcoord.x = SMAA_PIXEL_SIZE.x * SMAASearchLength(searchTex, e, 0.5, 0.5) + texcoord.x; //CJ - no change
- return texcoord.x;
- }
- float SMAASearchYUp(SMAATexture2D edgesTex, SMAATexture2D searchTex, float2 texcoord, float end) {
- float2 e = float2(1.0, 0.0);
- while (texcoord.y > end &&
- e.r > 0.8281 && // Is there some edge not activated?
- e.g == 0.0) { // Or is there a crossing edge that breaks the line?
- e = SMAASampleLevelZero(edgesTex, texcoord).rg;
- texcoord -= float2(0.0, 2.0) * SMAA_PIXEL_SIZE;
- }
- texcoord.y += 0.25 * SMAA_PIXEL_SIZE.y;
- texcoord.y += SMAA_PIXEL_SIZE.y;
- texcoord.y += 2.0 * SMAA_PIXEL_SIZE.y;
- //texcoord.y -= SMAA_PIXEL_SIZE.y * SMAASearchLength(searchTex, e.gr, 0.0, 0.5);
- texcoord.y = -SMAA_PIXEL_SIZE.y * SMAASearchLength(searchTex, e.gr, 0.0, 0.5) + texcoord.y; //CJ - no change
- return texcoord.y;
- }
- float SMAASearchYDown(SMAATexture2D edgesTex, SMAATexture2D searchTex, float2 texcoord, float end) {
- float2 e = float2(1.0, 0.0);
- while (texcoord.y < end &&
- e.r > 0.8281 && // Is there some edge not activated?
- e.g == 0.0) { // Or is there a crossing edge that breaks the line?
- e = SMAASampleLevelZero(edgesTex, texcoord).rg;
- texcoord += float2(0.0, 2.0) * SMAA_PIXEL_SIZE;
- }
- texcoord.y -= 0.25 * SMAA_PIXEL_SIZE.y;
- texcoord.y -= SMAA_PIXEL_SIZE.y;
- texcoord.y -= 2.0 * SMAA_PIXEL_SIZE.y;
- //texcoord.y += SMAA_PIXEL_SIZE.y * SMAASearchLength(searchTex, e.gr, 0.5, 0.5);
- texcoord.y = SMAA_PIXEL_SIZE.y * SMAASearchLength(searchTex, e.gr, 0.5, 0.5) + texcoord.y; //CJ - no change
- return texcoord.y;
- }
- /**
- * Ok, we have the distance and both crossing edges. So, what are the areas
- * at each side of current edge?
- */
- float2 SMAAArea(SMAATexture2D areaTex, float2 dist, float e1, float e2, float offset) {
- // Rounding prevents precision errors of bilinear filtering:
- float2 texcoord = float(SMAA_AREATEX_MAX_DISTANCE) * round(4.0 * float2(e1, e2)) + dist;
- // We do a scale and bias for mapping to texel space:
- texcoord = SMAA_AREATEX_PIXEL_SIZE * texcoord + (0.5 * SMAA_AREATEX_PIXEL_SIZE);
- // Move to proper place, according to the subpixel offset:
- //texcoord.y += SMAA_AREATEX_SUBTEX_SIZE * offset;
- texcoord.y = SMAA_AREATEX_SUBTEX_SIZE * offset + texcoord.y; //CJ
- // Do it!
- #if SMAA_HLSL_3 == 1
- return SMAASampleLevelZero(areaTex, texcoord).ra;
- #else
- return SMAASampleLevelZero(areaTex, texcoord).rg;
- #endif
- }
- //-----------------------------------------------------------------------------
- // Corner Detection Functions
- void SMAADetectHorizontalCornerPattern(SMAATexture2D edgesTex, inout float2 weights, float2 texcoord, float2 d) {
- #if SMAA_CORNER_ROUNDING < 100 || SMAA_FORCE_CORNER_DETECTION == 1
- float4 coords = SMAAMad(float4(d.x, 0.0, d.y, 0.0), //CJ - this look ripe for a rewrite
- SMAA_PIXEL_SIZE.xyxy, texcoord.xyxy);
- float2 e;
- /*
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(0.0, 1.0)).r;
- bool left = abs(d.x) < abs(d.y);
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(0.0, -2.0)).r;
- if (left) weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(1.0, 1.0)).r;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(1.0, -2.0)).r;
- if (!left) weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- */
- //bool left = abs(d.x) < abs(d.y);
- SMAA_BRANCH //CJ - test if this branch is faster than original code
- if (abs(d.x) < abs(d.y)) //if (left)
- {
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(0.0, 1.0)).r;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(0.0, -2.0)).r;
- }
- else
- {
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(1.0, 1.0)).r;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(1.0, -2.0)).r;
- }
- //weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- weights = SMAASaturate(-e * weights + (1.0 + float(SMAA_CORNER_ROUNDING) * 0.01) * weights); //CJ - should compile to a mad when SMAA_CORNER_ROUNDING is 0
- #endif
- }
- void SMAADetectVerticalCornerPattern(SMAATexture2D edgesTex, inout float2 weights, float2 texcoord, float2 d) {
- #if SMAA_CORNER_ROUNDING < 100 || SMAA_FORCE_CORNER_DETECTION == 1
- float4 coords = SMAAMad(float4(0.0, d.x, 0.0, d.y),
- SMAA_PIXEL_SIZE.xyxy, texcoord.xyxy);
- float2 e;
- /*
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2( 1.0, 0.0)).g;
- bool left = abs(d.x) < abs(d.y);
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(-2.0, 0.0)).g;
- if (left) weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2( 1.0, 1.0)).g;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(-2.0, 1.0)).g;
- if (!left) weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- */
- SMAA_BRANCH //CJ - test if this branch is faster than original code
- if (abs(d.x) < abs(d.y)) //if (left)
- {
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2( 1.0, 0.0)).g;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.xy, int2(-2.0, 0.0)).g;
- }
- else
- {
- e.r = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2( 1.0, 1.0)).g;
- e.g = SMAASampleLevelZeroOffset(edgesTex, coords.zw, int2(-2.0, 1.0)).g;
- }
- weights *= SMAASaturate(float(SMAA_CORNER_ROUNDING) / 100.0 + 1.0 - e);
- #endif
- }
- //-----------------------------------------------------------------------------
- // Blending Weight Calculation Pixel Shader (Second Pass)
- float4 SMAABlendingWeightCalculationPS(float2 texcoord,
- float2 pixcoord,
- float4 offset[3],
- SMAATexture2D edgesTex,
- SMAATexture2D areaTex,
- SMAATexture2D searchTex,
- int4 subsampleIndices) { // Just pass zero for SMAA 1x, see @SUBSAMPLE_INDICES.
- float4 weights = float4(0.0, 0.0, 0.0, 0.0);
- float2 e = SMAASample(edgesTex, texcoord).rg;
- SMAA_BRANCH
- //if (e.g > 0.0) { // Edge at north
- if (e.g != -e.r) { // Edge at north //CJ - if neither e.g or e.r is 0
- #if SMAA_MAX_SEARCH_STEPS_DIAG > 0 || SMAA_FORCE_DIAGONAL_DETECTION == 1
- // Diagonals have both north and west edges, so searching for them in
- // one of the boundaries is enough.
- weights.rg = SMAACalculateDiagWeights(edgesTex, areaTex, texcoord, e, subsampleIndices);
- // We give priority to diagonals, so if we find a diagonal we skip
- // horizontal/vertical processing.
- SMAA_BRANCH
- //if (dot(weights.rg, float2(1.0, 1.0)) == 0.0) {
- //if (!(weights.r + weights.g)) { //CJ
- //if ((weights.r + weights.g) == 0.0) { //CJ one instruction shorter
- if (weights.r == -weights.g) { //CJ one instruction shorter - same asm as above
- #endif
- float2 d;
- // Find the distance to the left:
- float2 coords;
- coords.x = SMAASearchXLeft(edgesTex, searchTex, offset[0].xy, offset[2].x);
- coords.y = offset[1].y; // offset[1].y = texcoord.y - 0.25 * SMAA_PIXEL_SIZE.y (@CROSSING_OFFSET)
- d.x = coords.x;
- // Now fetch the left crossing edges, two at a time using bilinear
- // filtering. Sampling at -0.25 (see @CROSSING_OFFSET) enables to
- // discern what value each edge has:
- float e1 = SMAASampleLevelZero(edgesTex, coords).r;
- // Find the distance to the right:
- coords.x = SMAASearchXRight(edgesTex, searchTex, offset[0].zw, offset[2].y);
- d.y = coords.x;
- // We want the distances to be in pixel units (doing this here allow to
- // better interleave arithmetic and memory accesses):
- //d = d / SMAA_PIXEL_SIZE.x - pixcoord.x;
- d = d * (1.0 / SMAA_PIXEL_SIZE.x) - pixcoord.x; //CJ - no change
- // SMAAArea below needs a sqrt, as the areas texture is compressed
- // quadratically:
- float2 sqrt_d = sqrt(abs(d));
- // Fetch the right crossing edges:
- float e2 = SMAASampleLevelZeroOffset(edgesTex, coords, int2(1, 0)).r;
- // Ok, we know how this pattern looks like, now it is time for getting
- // the actual area:
- weights.rg = SMAAArea(areaTex, sqrt_d, e1, e2, float(subsampleIndices.y));
- // Fix corners:
- SMAADetectHorizontalCornerPattern(edgesTex, weights.rg, texcoord, d);
- #if SMAA_MAX_SEARCH_STEPS_DIAG > 0 || SMAA_FORCE_DIAGONAL_DETECTION == 1
- } else
- e.r = 0.0; // Skip vertical processing.
- #endif
- SMAA_BRANCH
- if (e.r > 0.0) { // Edge at west
- float2 d;
- // Find the distance to the top:
- float2 coords;
- coords.y = SMAASearchYUp(edgesTex, searchTex, offset[1].xy, offset[2].z);
- coords.x = offset[0].x; // offset[1].x = texcoord.x - 0.25 * SMAA_PIXEL_SIZE.x;
- d.x = coords.y;
- // Fetch the top crossing edges:
- float e1 = SMAASampleLevelZero(edgesTex, coords).g;
- // Find the distance to the bottom:
- coords.y = SMAASearchYDown(edgesTex, searchTex, offset[1].zw, offset[2].w);
- d.y = coords.y;
- // We want the distances to be in pixel units:
- d = d / SMAA_PIXEL_SIZE.y - pixcoord.y;
- // SMAAArea below needs a sqrt, as the areas texture is compressed
- // quadratically:
- float2 sqrt_d = sqrt(abs(d));
- // Fetch the bottom crossing edges:
- float e2 = SMAASampleLevelZeroOffset(edgesTex, coords, int2(0, 1)).g;
- // Get the area for this direction:
- weights.ba = SMAAArea(areaTex, sqrt_d, e1, e2, float(subsampleIndices.x));
- // Fix corners:
- SMAADetectVerticalCornerPattern(edgesTex, weights.ba, texcoord, d);
- }
- } // CJ
- return weights;
- }
- //-----------------------------------------------------------------------------
- // Neighborhood Blending Pixel Shader (Third Pass)
- float4 SMAANeighborhoodBlendingPS(float2 texcoord,
- float4 offset[2],
- SMAATexture2D colorTex,
- SMAATexture2D blendTex) {
- // Fetch the blending weights for current pixel:
- float4 a;
- a.xz = SMAASample(blendTex, texcoord).xz;
- a.y = SMAASample(blendTex, offset[1].zw).g;
- a.w = SMAASample(blendTex, offset[1].xy).a;
- // Is there any blending weight with a value greater than 0.0?
- SMAA_BRANCH
- //if (dot(a, float4(1.0, 1.0, 1.0, 1.0)) < 1e-5)
- // return SMAASampleLevelZero(colorTex, texcoord);
- if (((a.x + a.z) + (a.y + a.w)) < 1e-5) //CJ - reduces number of instruction slots
- return SMAASampleLevelZero(colorTex, texcoord); //CJ
- else {
- //float4 color = float4(0.0, 0.0, 0.0, 0.0);
- // Up to 4 lines can be crossing a pixel (one through each edge). We
- // favor blending by choosing the line with the maximum weight for each
- // direction:
- float2 offset;
- offset.x = a.a > a.b? a.a : -a.b; // left vs. right
- offset.y = a.g > a.r? a.g : -a.r; // top vs. bottom
- /*
- // Then we go in the direction that has the maximum weight:
- if (abs(offset.x) > abs(offset.y)) // horizontal vs. vertical
- offset.y = 0.0;
- else
- offset.x = 0.0;
- */
- // Then we go in the direction that has the maximum weight:
- bool2 whichway = saturate(abs(offset.xy) - abs(offset.yx)); // CJ - same # of instructions but one GPR less
- //float2 whichway = step( abs(offset.xy) , abs(offset.yx) ); //CJ same as above - but now with a possible error
- offset = offset * whichway; //CJ
- #if SMAA_REPROJECTION == 1
- // Fetch the opposite color and lerp by hand:
- float4 C = SMAASampleLevelZero(colorTex, texcoord);
- texcoord += sign(offset) * SMAA_PIXEL_SIZE;
- //texcoord = whichway * SMAA_PIXEL_SIZE + texcoord; //CJ faster - but beware that I have not been able to test this. It didn't work for the SMAA_DIRECTX9_LINEAR_BLEND == 1 path though.
- float4 Cop = SMAASampleLevelZero(colorTex, texcoord);
- float s = abs(offset.x) > abs(offset.y)? abs(offset.x) : abs(offset.y);
- //float s = max(abs(offset.x),abs(offset.y)); //CJ
- // Unpack the velocity values:
- C.a *= C.a;
- Cop.a *= Cop.a;
- // Lerp the colors:
- float4 Caa = SMAALerp(C, Cop, s);
- // Unpack velocity and return the resulting value:
- Caa.a = sqrt(Caa.a);
- return Caa;
- #else
- #if SMAA_HLSL_4 == 1 || SMAA_DIRECTX9_LINEAR_BLEND == 0
- // We exploit bilinear filtering to mix current pixel with the chosen
- // neighbor:
- texcoord += offset * SMAA_PIXEL_SIZE;
- return SMAASampleLevelZero(colorTex, texcoord);
- #else
- // Fetch the opposite color and lerp by hand:
- float4 C = SMAASampleLevelZero(colorTex, texcoord);
- texcoord += sign(offset) * SMAA_PIXEL_SIZE;
- //texcoord = whichway * SMAA_PIXEL_SIZE + texcoord; //CJ faster this way, but causes less smooth lines and I haven't been able to figure out why yet
- float4 Cop = SMAASampleLevelZero(colorTex, texcoord);
- float s = abs(offset.x) > abs(offset.y)? abs(offset.x) : abs(offset.y);
- //float s = max(abs(offset.x),abs(offset.y)); //CJ - No change. Results in same ASM as above
- //float s = offset.x + offset.y; //CJ at this point we should be sure that either offset.x or .y is 0 so we can just add them - again no improvement in ASM :(
- return SMAALerp(C, Cop, abs(s));
- #endif
- #endif
- }
- }
- //-----------------------------------------------------------------------------
- // Temporal Resolve Pixel Shader (Optional Fourth Pass)
- float4 SMAAResolvePS(float2 texcoord,
- SMAATexture2D colorTexCurr,
- SMAATexture2D colorTexPrev
- #if SMAA_REPROJECTION == 1
- , SMAATexture2D velocityTex
- #endif
- ) {
- #if SMAA_REPROJECTION == 1
- // Velocity is calculated from previous to current position, so we need to
- // inverse it:
- float2 velocity = -SMAASample(velocityTex, texcoord).rg;
- // Fetch current pixel:
- float4 current = SMAASample(colorTexCurr, texcoord);
- // Reproject current coordinates and fetch previous pixel:
- float4 previous = SMAASample(colorTexPrev, texcoord + velocity);
- // Attenuate the previous pixel if the velocity is different:
- float delta = abs(current.a * current.a - previous.a * previous.a) / 5.0;
- //float delta = abs(dot(float2(current.a,current.a),float(-previous.a,previous.a)) / 5.0; //CJ
- //float delta = 0.20 * (current.a + previous.a) * abs(current.a - previous.a) //CJ
- float weight = 0.5 * SMAASaturate(1.0 - (sqrt(delta) * SMAA_REPROJECTION_WEIGHT_SCALE));
- // Blend the pixels according to the calculated weight:
- return SMAALerp(current, previous, weight);
- #else
- // Just blend the pixels:
- float4 current = SMAASample(colorTexCurr, texcoord);
- float4 previous = SMAASample(colorTexPrev, texcoord);
- return SMAALerp(current, previous, 0.5);
- #endif
- }
- //-----------------------------------------------------------------------------
- #endif // SMAA_ONLY_COMPILE_VS == 0
|